--- title: "Safe Island-Mode Switching in Home Assistant" date: 2026-11-17 tldr: "How I built a break-before-make Home Assistant script with 15-second delays and a two-tier battery SOC safety net to switch my home office between grid power and battery island mode without frying anything." tags: - Home Assistant - Smart Home - Solar - Automation layout: post.njk lang: en translationKey: safe-island-mode-switching-ha --- Running a home office off a DIY battery and an inverter sounds great until you actually have to switch between grid power and island mode. If you just flip smart plugs in the wrong order—or too fast—you risk backfeeding, tripping breakers, or giving your power station a nasty voltage spike. I wanted to automate switching my office between grid power and battery island mode in Home Assistant, so I built a strict "break-before-make" sequence with generous cooldowns and a two-tier safety net. ## The Break-Before-Make Script ![Safe Island-Mode Switching in Home Assistant](/img/safe-island-mode.svg) The core of the setup is a Home Assistant script called `office_stromquelle_auf_batterie`. Instead of flipping everything at once, it follows an exact 8-step sequence: 1. **Shut down chargers and boost:** First, I turn off the battery boost switch (`switch.office_battery_controller_daemon_office_akku_boost_laden_forcieren`), the BMS charging switch (`switch.jbd_bms_ble_jbd_bms_ble_charging`), and the Shelly charger (`light.shelly_office_charger`). 2. **Stabilize (5 seconds):** A short 5-second delay lets the load settle before any relays click. 3. **Disconnect the load:** I turn off `switch.plug_office_river`, which disconnects my EcoFlow River power station from the upstream circuit. 4. **Wait (15 seconds):** Fifteen seconds of dead air so capacitors discharge and nothing is under load. 5. **Switch to island mode:** I turn off `switch.plug_office_no_ups` to cut the grid bypass and let the inverter take over. 6. **Wait again (15 seconds):** Another 15-second pause to let the inverter output stabilize. 7. **Reconnect the load:** Finally, I turn `switch.plug_office_river` back on so the power station is fed by the island grid. 8. **Update state:** The script sets `input_select.office_stromquelle` to `"Batterie (Inselbetrieb)"`. Here is the actual sequence from my `scripts.yaml`: ```yaml office_stromquelle_auf_batterie: alias: "Office-Stromquelle: Umschalten auf Batterie (Inselbetrieb)" icon: "mdi:battery-high" mode: single sequence: - action: switch.turn_off target: entity_id: - switch.office_battery_controller_daemon_office_akku_boost_laden_forcieren - switch.jbd_bms_ble_jbd_bms_ble_charging - action: light.turn_off target: entity_id: light.shelly_office_charger - delay: seconds: 5 - action: switch.turn_off target: entity_id: switch.plug_office_river - delay: seconds: 15 - action: switch.turn_off target: entity_id: switch.plug_office_no_ups - delay: seconds: 15 - action: switch.turn_on target: entity_id: switch.plug_office_river - action: input_select.select_option target: entity_id: input_select.office_stromquelle data: option: "Batterie (Inselbetrieb)" ``` Switching back to grid power (`office_stromquelle_auf_netz`) uses the same break-before-make logic in reverse: disconnect `switch.plug_office_river`, wait 15 seconds, turn `switch.plug_office_no_ups` back on, wait another 15 seconds, reconnect `switch.plug_office_river`, and update `input_select.office_stromquelle` to `"Netzstrom"`. ## Why Two Safety Automations? Even with a clean switching script, batteries run empty. And if you're in the middle of a video call, you don't want your office going dark—or worse, draining your LiFePO4 cells to zero. I set up two separate automations in `automations.yaml` watching `sensor.jbd_bms_ble_jbd_bms_ble_state_of_charge`: - **Graceful switch at 10% SOC (`office_akku_entladen_schutz_soc_tief`):** When the battery drops below 11% (i.e., 10% or lower) while in island mode or discharging, Home Assistant runs `script.office_stromquelle_auf_netz`, sets the battery controller mode to `standby`, and sends me a Telegram message. - **Emergency fallback at 5% SOC (`buro_office_batterie_notstrom_fallback`):** If the graceful switch somehow didn't catch it and the battery drops below 6% (5% or lower), this automation skips the 15-second delays and immediately turns on both `switch.plug_office_no_ups` and `switch.plug_office_river`, followed by a critical Telegram alert. ## What I Learned Those 15-second delays feel like an eternity when you're testing them, but they've completely eliminated relay chatter and weird inverter hiccups. Having `mode: single` on the scripts also ensures I can't accidentally trigger a second switch while one is already mid-sequence. It's not flashy, but it's rock solid.